Warning Light / Indicator Light Operating Principle

Highly diffusible light bulb that refracts light though a special lens and can be used in a steady or flashing  state.

By combining a highly diffusible light bulb and a reflector, light is reflected in a parallel beam with a rotating cycle.

Our bulb revolving model has a long lifetime enabled by using a high durabilitybulb and a power transfer system that minimizes noise and abrasion.

The combination of an LED and a reflector creates a parallel light beam with a rotating cycle.

LED Rotating model with reflector adopts a special light distribution and multiple reflection system that is obtained a patent by Qlight can emit the light intensively and evenly as same as a bulb rotating type with reflector. 

(Patent No.: 10-0889803, 10-0808669 and 20-2008-0002489)

By shortening the LED flashing period and supplying the maximum current to the LED, It produces a flash effect just like the xenon lamp.

The indirect light distribution system uses a special structure to radiate a uniform light signal throughout the entire body of the lens by using a multi-stage reflector.

The direct light distribution system uses a high-intensity LED light and diffusion lens to transfer signal over a long distance. Qlight LED lights / flashing lights are equipped with two structures depending on the model type, Steady or Flashing Type.

By uniformly arranging the LED lens in a 360 degree circumferential direction, it will produce a flash in a regular rotating sequence The visual effect looks just the same as the revolving mode.

An intensive flashing light emitting model with short-term energy consumption that can highly attract worker's attention. It has better shock resistance than a conventional bulb and is weaker than an LED. 

Since it adopts intensive xenon lamp light emitting into the lens design, it can emit intensive signal light in all lens directions.