The combination of sounds(Special)
Special Alarm Type Feature
- A special alarm type products are classified into two models; basic model with special alarm and SD card (MP3) model.
- The 2 models have 31 built-in sounds, which can be chosen and played by binary input method.
- When storing MP3 files on the SD card (MP3) type models, you can select and play up to 31 sounds by using the binary input method. The bit input method can play 5 sound from #1 to #5, depending on the specifications given in the file name(For file specifications refer to Page30.)
- Includes eight play mode settings. For example, when the continuous playback setting/function is selected the warning message is played continuously for conditions that require frequent playback.
Built-in sound type model
SD card(MP3) type product feature
1. SOUND setting switch
- If the switch is ON the SD card (MP3) will be played, and if the switch is OFF the built-in sounds will be played.
2. SD cards
- The SD card is a compact flash memory card for storing MP3 files.
- After saving the MP3 files in the SD card with the specified format, insert the card into the SD card slot and switch the sound setting switch to ON so the sounds can be played from the SD card.
3. PLAY MODE setting switch
- PLAY MODE setting switch is used to choose the channel input method or select various playing modes. Refer to the table below for switch features.
- Switch #0 and #9 is not used.
| No. | Mode | Description |
| 1 | Bit Input Mode |
5 sounds can be played from the selected group (choose one group from six groups) Play sound only once (if using sequential signal input or pulse signal input) |
| 2 | Binary Input Mode | Up to 31 sounds available for each model. Plays sound only once (sequential signal input only |
| 3 | Bit Input Hold Playback Mode |
5 sounds can be played from the selected group (choose one group from six groups) The sound is repeated if the input signal is maintained. (sequential signal input only) If the STOP signal is inputted, the sound is turned off, and if the STOP signal is disabled the sound is played repeatedly |
| 4 | 4 Binary Input Hold Playback Mode |
Up to 31 sounds available for each model The sound is repeated if the input signal is maintained. (sequential signal input only) If the STOP signal is inputted, the sound is turned off, and if the STOP signal is disabled the sound is played repeatedly |
| 5 | 5 Bit Input Sound Reduction Mode |
5 sounds can be played from the selected group (choose one group from six groups) You can reduce the volume(15dB) by using a separate volume reduction signal line (same as volume reduction signal input) |
| 6 | Binary Input Sound Reduction Mode |
Up to 31 sounds available for each model You can reduce the volume(15dB) by using a separate volume reduction signal line (same as volume reduction signal input) |
| 7 | Bit Input Sequence Memory Playback Mode |
5 sounds can be played from the selected group (choose one group from six groups) If the sound is inputted in a order, it will remember the order and play each sound about 3 seconds. The last input channel is fully played (bit input mode only |
| 8 | Test Mode |
In test mode, Ch1 of group is automatically played back repeatedly. To end the test mode, switch back to the other modes. |
4. Channel selection switch
- By using 5 channel selection switches, one can choose the appropriate sound source depending on the Binary input and Bit input.
5. VOLUME
- You can adjust the speakers sound output by using the volume dial.
Sound Pattern and Combination for Special Alarm Type
- Special alarm type product has 31 pre-recorded sound tones.
- Supports binary input mode. 5ch switch allows for 31 sound tones
Composition of binary input mode
- Left channel switch allows for choosing 31 sound tones.
- Channel switch will be substituted for an external wiring in case of LC type products.
| No. | 1 | 2 | 3 | 4 | 5 | Sound tone | Frequency |
| 0 | 0 | 0 | 0 | 0 | 0 | No sound | |
| 1 | 0 | 0 | 0 | 0 | 1 | Rel rel rel | 730Hz-920Hz |
| 2 | 0 | 0 | 0 | 1 | 0 | Slow Ambulance PI-PO | 820Hz-1.05kHz |
| 3 | 0 | 0 | 0 | 1 | 1 | Oit Oit warning sound | 360Hz-1.56kHz |
| 4 | 0 | 0 | 1 | 0 | 0 | Emergency WA-U(Yelp) | 770Hz-1.2kHz |
| 5 | 0 | 0 | 1 | 0 | 1 | Pi- buzzer | 770Hz |
| 6 | 0 | 0 | 1 | 1 | 0 | 7 Short PI. / 1 Long | 715Hz |
| 7 | 0 | 0 | 1 | 1 | 1 | Pi o Pi o | 940Hz-2.19kHz |
| 8 | 0 | 1 | 0 | 0 | 0 | Phone Ring | 740Hz-910Hz |
| 9 | 0 | 1 | 0 | 0 | 1 | Pi- buzzer | 600Hz |
| 10 | 0 | 1 | 0 | 1 | 0 | Pi pi pi short | 420Hz |
| 11 | 0 | 1 | 0 | 1 | 1 | Di o Di o 2 tones buzzer | 600Hz-1.14kHz |
| 12 | 0 | 1 | 1 | 0 | 0 | Oit Oit warning sound | 500Hz-1.11kHz |
| 13 | 0 | 1 | 1 | 0 | 1 | Slow Ambulance PI-PO | 380Hz-470Hz |
| 14 | 0 | 1 | 1 | 1 | 0 | Slow Di o Di o | 680Hz-840Hz |
| 15 | 0 | 1 | 1 | 1 | 1 | Fast Li o li o | 380Hz-470Hz |
| 16 | 1 | 0 | 0 | 0 | 0 | Fire.A-ANG | 770Hz-1.11kHz |
| 17 | 1 | 0 | 0 | 0 | 1 | Fast Ambulance PI-PO | 680Hz-840Hz |
| 18 | 1 | 0 | 0 | 1 | 0 | Slow Ambulance PI-PO | 650Hz-840Hz |
| 19 | 1 | 0 | 0 | 1 | 1 | Ri ro ri ro warning sound | 420Hz-470Hz |
| 20 | 1 | 0 | 1 | 0 | 0 | Repeat Di-o 3 times | 680Hz-840Hz |
| 21 | 1 | 0 | 1 | 0 | 1 | Fire.A-ANG | 500Hz-1kHz |
| 22 | 1 | 0 | 1 | 1 | 0 | Ambulance PI-PO | 680Hz-840Hz |
| 23 | 1 | 0 | 1 | 1 | 1 | Slow Fire.A-ANG | 480Hz-1.14kHz |
| 24 | 1 | 1 | 0 | 0 | 0 | Pi-pi- buzzer low frequency | 690Hz |
| 25 | 1 | 1 | 0 | 0 | 1 | Pi-pi- buzzer high frequency | 950Hz |
| 26 | 1 | 1 | 0 | 1 | 0 | Di-di- buzzer high frequency | 800Hz |
| 27 | 1 | 1 | 0 | 1 | 1 | Di-di- buzzer low frequency | 500Hz |
| 28 | 1 | 1 | 1 | 0 | 0 | Rising Po-ong | 500Hz-1.2kHz |
| 29 | 1 | 1 | 1 | 0 | 1 | Fast Ambulance PI-PO | 825Hz-1.07kHz |
| 30 | 1 | 1 | 1 | 1 | 0 | Rising frequency | 150Hz-1kHz |
| 31 | 1 | 1 | 1 | 1 | 1 | Repeat A-ANG | 1.4kHz-1.56kHz |
Connect with Us!
Qlight is ready to provide supreme services.
We will give you a prompt response once you leave a message on the contact form.