qlight logo Safety Seen, Safety Secured

The combination of sounds(Multifunctional)

Multifunctional Type Feature

How to set up the multifunctional products(MP3)
  • Multifunctional type products can play MP3 sounds by using an SD card and can also play WS (5 Warning sounds), WP (5 special warning sounds 1st Group), WM (5 Melodies), WA (5 Alarms), WO (5 special warning sounds 2nd Group), and WN (5 special warning sounds 3rd Group) when not using a SD card.
  • Includes seven different functions. For example, it is able to playback the message continuously with the continuous playback function for warning message that needs to be repeated often.

 

FUNCTION SETTING

FUNCTION SETTING

1. Sound setting switch

  • SD card type unit

 - It can choose both built-in sounds and user defined sounds(MP3) by controlling sound setup switch no. 1.

 

  • Standard unit

 - It can choose both Bit input mode and Binary input mode by controlling sound setup switch no. 1

   You can select between pre-recorded sound mode and SD card sound(MP3) mode with the SOUND selection switch

Bit input mode selection from 6 groups

  • 30 pre-recorded sounds offered(5 warning sounds, 5 special warning sounds 1st group, 5 melodies, 5 alarms, 5 special warning sounds 2nd group, 5 special warning sounds 3rd group)
  • External MP3 sound support(SD card)
  • Binary input: 30 channels
  • Bit input: 5 channels(6 sound groups)
  • A multi-functional product that can use an SD card for MP3 playback
  • Details on how to setup the multi-functional speakerphone are on page 140

 


2. SD cards

  • The SD card is a compact flash memory card for storing MP3 files.
  • After saving the MP3 files in the SD card with the specified format, insert the card into the SD card slot and switch the sound setting switch to ON so the sounds can be played from the SD card.


3. PLAY MODE setting switch

  • PLAY MODE setting switch is used to choose the channel input method or select various playing modes. Refer to the table below for switch features.
  • Switch #0 and #9 is not used.
No.  Mode Description
1 Bit Input Mode

5 sounds can be played from the selected group (choose one group from six groups)

Play sound only once (if using sequential signal input or pulse signal input)

2 Binary Input Mode Up to 31 sounds available for each model. Plays sound only once (sequential signal input only
3 Bit Input Hold Playback Mode

5 sounds can be played from the selected group (choose one group from six groups)

The sound is repeated if the input signal is maintained. (sequential signal input only)

If the STOP signal is inputted, the sound is turned off, and if the STOP signal is disabled the sound is played repeatedly

4 4 Binary Input Hold Playback Mode

Up to 31 sounds available for each model

The sound is repeated if the input signal is maintained. (sequential signal input only)

If the STOP signal is inputted, the sound is turned off, and if the STOP signal is disabled the sound is played repeatedly

5 5 Bit Input Sound Reduction Mode

5 sounds can be played from the selected group (choose one group from six groups)

You can reduce the volume(15dB) by using a separate volume reduction signal line (same as volume reduction signal input)

6 Binary Input Sound Reduction Mode

Up to 31 sounds available for each model 

You can reduce the volume(15dB) by using a separate volume reduction signal line (same as volume reduction signal input)

7 Bit Input Sequence Memory Playback Mode

5 sounds can be played from the selected group (choose one group from six groups)

If the sound is inputted in a order, it will remember the order and play each sound about 3 seconds.

The last input channel is fully played (bit input mode only

8 Test Mode

In test mode, Ch1 of group is automatically played back repeatedly.

To end the test mode, switch back to the other modes.

 

4. VOLUME

  • Multifunctional product has 30 pre-recorded sound tones.
  • 30 sound tones in binary input mode supported. Bit input mode has 5 sound tones within 1 group among 6 groups.
Bit input mode's sound tone combinations
  • Left channel switch allows to select 5 tons individually within designated group. (For group selection, please refer to page 28 “How to set-up the multifunctional products”)
  • Channel switch will be substituted for external wiring in case of LC type products.
  Sound Ch Sound Tone   Sound Ch Sound Tone
WS 5 Warning Sounds Ch1 Fire.A-ANG(560Hz-1.5kHz) WA 5 Alarms Ch1 Beep Intermittent
Ch2 Emergency WA-U(Yelp)(600Hz-1.5kHz)  Ch2 Door Chime
Ch3 Ambulance PI-PO(Hi-low)(450Hz-900Hz) Ch3 Phone Ring
Ch4 Machinery Fault(820Hz) Ch4 PI.PI.PI Short
Ch5 High Expansion(1kHz Ch5 Tripping Beat
WP

5 Special Warning Sounds 

(1st Group)

Ch1 Fire.A-ANG(560Hz-1.5kHz) WO

5 Special Warning Sounds 

(2nd Group)

Ch1 Rel rel rel(730Hz-920Hz)
Ch2 Abandon Alarm(820Hz) Ch2 Slow Ambulance PI-PO(820Hz-1.05kHz)
Ch3 Machinery Fault(820Hz) Ch3 Wye yong Wye yong(770Hz-1.2kHz)
Ch4 High Expansion(1kHz) Ch4 Phone ring 2(740Hz-910Hz)
Ch5 7 Short PI. / 1 Long(1kHz) Ch5 Fire.A-ANG(770Hz-1.11kHz)
WM 5 Melodies Ch1 Sweet Home WN

5 Special Warning Sounds 

(3rd Group)

Ch1 Oit Oit(500Hz-1.11kHz
Ch2 For Elise Ch2 Pi o Pi o(940Hz-2.19kHz)
Ch3 Cuckoo's Waltz Ch3 Slow Di o Di o(680Hz-840Hz)
Ch4 Piano Sonata Ch4 Li long Li ling(420Hz-470Hz)
Ch5 Turkish March Ch5 911 Siren(150Hz-1kHz)
No. 1 2 3 4 5 Sound tone Frequency
0 0 0 0 0 0 No sound  
1 0 0 0 0 1 Fire.A-ANG 560Hz-1.5kHz
2 0 0 0 1 0 Emergency WA-U(Yelp)  600Hz-1.5kHz
3 0 0 0 1 1 Ambulance PI-PO(Hi-low) 450Hz-900Hz
4 0 0 1 0 0 Pi-ik Pi-ik 820Hz
5 0 0 1 0 1 Machinery Fault 820Hz
6 0 0 1 1 0 High Expansion 1kHz
7 0 0 1 1 1 Alarm 1kHz
8 0 1 0 0 0 Sweet Home -
9 0 1 0 0 1 For Elise -
10  0 1 0 1 0 Cuckoo's Waltz -
11 0 1 0 1 1 Piano Sonata -
12 0 1 1 0 0 Turkish March -
13 0 1 1 0 1 Magic Flute -
14 0 1 1 1 0 Badinerie -
15 0 1 1 1 1 Pineapple Rag -
16 1 0 0 0 0 Beep Intermittent -
17 1 0 0 0 1 Door Chime -
18 1 0 0 1 0 Phone Ring -
19 1 0 0 1 1 PI.PI.PI Short -
20 1 0 1 0 0 Tripping Beat -
21 1 0 1 0 1 Rel rel rel 730Hz-920Hz
22 1 0 1 1 0 Slow Ambulance PI-PO 820Hz-1.05kHz
23 1 0 1 1 1 Wye yong Wye yong 770Hz-1.2kHz
24 1 1 0 0 0 Phone ring 2 740Hz-910Hz
25 1 1 0 0 1 Fire.A-ANG 770Hz-1.11kHz
26 1 1 0 1 0 Oit Oit 500Hz-1.11kHz
27 1 1 0 1 1 Pi o Pi o 940Hz-2.19kHz
28 1 1 1 0 0 Slow Di o Di o 680Hz-840Hz
29 1 1 1 0 1 Li long Li ling 420Hz-470Hz
30 1 1 1 1 0 911 Siren 150Hz-1kHz
Products
Solutions
Connect

Connect with Us!

Qlight is ready to provide supreme services.
We will give you a prompt response once you leave a message on the contact form.

Video